hi guys
i have USDM 328i '13MY with CIC, with big screen, AV input and proffi navi, BUT
no PDC/cameras.
Installing PDC is expensive and hard to implement, but I really used to rearview camera on my previous cars.
I've bought:
1. TRCVS unit 66 53 9 393 953 (or similar 66 53 9 302 256, from f30)
2. camera module 66 53 9 240 351
3. package of camera installation 61 12 2 183 660 (wires and so on). This number is from F10, but it's good too. Original F30 is 61 12 2 154 696 i think.
4. trunk opener with place for camera 51 24 7 368 753
5. REM module 61 35 9 329 700 or 61 35 9 374 507. Important! You can use any other part number, BUT revision must be F4C or F4A (look picture below)
0. We need to read our VO to file from our stock car
1. Changing REM to needed version is taking about 10 minutes.
2. Using
Genuine BMW Retrofit manual for 3-er F30х series we've mounted TRCVS unit and trunk opener with camera, mounted wires to units and to HU
3. Coding
3.1 we need to write VO from stock file to new REM
3.2 write 3AG option to our VO, then code REM, HU_NBT/HU_CIC
3.3 optional, we can code HU_CIC/NBT for some codes for legal disclaimer removal AND coding a "Trailer" function of camera:
LEGAL_DISCLAIMER_TIME
kein_ld Removes iDrive Initial Disclaimer
MACRO_CAM_LEGALDISCLAIMER
kein_ld Removes disclaimer for all cameras and PDC
MACRO_TRAILER _COUPLING
aktiv Enabling trailer mode when camera is active
